How It Works
Guaranteed Air Sealing In Four Easy Steps
Prep & Setup
Prep the area by covering any openings that won’t be sealed. This includes taping or covering any designed openings or finished horizontal surfaces within the space. Emitters are then set up throughout the area to be air sealed.
The AeroBarrier Connect system is then set up. It includes a blower door, nozzle stations and hoses, a fan with lay-flat tubing, and the master control unit.
Pressurize & Apply
Using a blower door, the space is pressurized. After that, a computer controls the entire process including the temperature, pressure, humidity, and distribution of sealant within the space.
Seal & Monitor
With the AeroBarrier Connect system, you see results in real-time. You have complete control over your desired level of airtightness and can achieve any level required. At the end of the process, a final blower door test is run to verify the air sealing results. AeroBarrier then provides a Certificate of Completion that shows pre and post leakage.
Clean Up
After the air sealing is complete, work can resume in the space within 30 minutes. At that time, clean up of all equipment and removal of all tape and coverings can occur.